Basing Tips

[Oil Sucker]

This is based on " The stone and rock guide" , so this will not cover any painting technics.

Here's a quick guide to non-desert or building base that will appeal on the table-top and realistic.

1. Start by adding a layer od sand to the bottom, than add much largger rocks onto the top.
http://i119.photobucket.com/albums/o127/necrons6187/100_1025.jpg

2. Than spin a paper slip wire at the end of your brush.
http://i119.photobucket.com/albums/o127/necrons6187/100_1026.jpg

3. You should end up with something like this.
http://i119.photobucket.com/albums/o127/necrons6187/100_1028.jpg

4. Cut them into parts if you wish.
http://i119.photobucket.com/albums/o127/necrons6187/100_1029.jpg

5. Add to the base.
http://i119.photobucket.com/albums/o127/necrons6187/100_1030.jpg

6. Put the model on and done !

Examples:
http://i119.photobucket.com/albums/o127/necrons6187/100_1031.jpg
http://i119.photobucket.com/albums/o127/necrons6187/100_1032.jpg
http://i119.photobucket.com/albums/o127/necrons6187/100_1033.jpg

Hope this helps !